Products

Extra Fine Cut Wood Blades - for beautifully fine splinter-free cuts in plywood Laminated ply Solid laminates and timber. Fine Sawblades ATB 15° ...

Extra Long Square Mortice Chisel and Bit Set - 1/2inch Our premium mortice bits are made in Japan by Nakahashi. Nakahashi mortice bits outlast less...

Fine Cross Cut Sawblades for Drop Saws, Mitre Saws Designed with a high number of teeth for finishing cuts. Particularly suited to cross-grain cut...

Premier Industrial Fine Cross Cut Sawblades ATB 15° alternate bevel teeth with positive hook for fine cross cutting. For use on large dropsaws an...

Fine Cut Sawblades for Portable Machines Designed with a high number of teeth. Particularly suited to cross grain and finishing in solid wood. Whe...

Premium Industrial Fine Sawblades ATB 15° alternate bevel tooth with positive hook for fine cross cutting and finishing cuts on Solid wood Single ...

Premium low noise High Performance Industrial Fine Cut Sawblades for Heavier section Aluminum Flat - Triple Chip tooth with 6 degree negative cutt...

Premium Low Noise Industrial Fine Cut Sawblades for Light Aluminium Triple chip teeth with Negative hook Fine Cut Sawblades for Light Aluminium bet...

Premium quality High Performance Anti vibration Industrial Fine Cut Sawblades for Plastics Flat -10° alternate bevel teeth with 5° alternate shear...

Premium High Performance Industrial Fine Hollow Face Sawblades for Laminated Panels. Designed for leaving a chip free finish in melamine and whiteb...

Experience unmatched cutting performance with Freud's High Performance Industrial Fine Steep Top Sawblades for Laminated Panels. Whether you're cut...

Introducing the ultimate solution for your laminated panel cutting needs - the Fine Triple Chip Sawblades from Freud. These premium industrial-grad...

Premier quality Fine Triple Chip Sawblades for Solid Surface and Thick plastics Application: for swirl-free cuts. Machines: Table saws, Mitre Sa...

Flush Trim Router Bit Made from Solid Carbide - specially designed for tight areas and corner small radius 6.35mm Diameter x 25.4mm Cut Length x 6....

Full Edge Radius Router Bit for radius edging with full form.  37mm Diameter x 32mm Cutter Height x 10mm Radius x 1/2" Shank

General Purpose Sawblades for Portable Machines General Purpose Sawblades Designed with alternate bevel anti kick back teeth for clean cutting for...

Simple! Just immerse the Cutters, Bearings, and Collets in the liquid for a few hours or overnight so Gleiten-Clean can soak into the dirt, resin, ...

Gleiten-Lube AL – Aluminium Machining Lubricant Gleiten-Lube AL is a high-performance, oil-based lubricant developed in Germany for precision alumi...

Gleiten-Lube AL – Low Residue Aluminium Lubricant This premium German-engineered lubricant is specially formulated for aluminium machining. It’s no...

Lube Aluminium Spray Aerosol Can 400ml Made in Germany Ideal for on-site work on portable machines: cutting, boring, tapping Quick, convenient and...

Our Konig high-precision heat shrink toolholder is designed for the precise clamping of tool shanks made from solid carbide or steel. This holder o...

Digital Vernier Height Gauge It is designed to make it super Safe, Fast, and Easy to measure the old cutter before removing it so that the new cutt...

10 Piece Handy Pack 5mm Hex x 50mm total Length • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • C...

10 Pack • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged tip, for an ideal fit ...

10 Pack • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged tip, for an ideal fit ...

Hex Shank Holesaw Arbors 33-4100, to suit holesaws up to 30mm diameter 33-4102, to suit holesaws above 30mm diameter

The cross hole construction is the most universal product, suiting the widest range of materials. Optimum deburrer results are obtained in ferrous ...

HSS Dowell Point Drills Super strength HSS steel.  Precision balanced center point.  2 precision ground cutting edges (Z2). HSS drills with ...

HSS Drill/Countersink 6.35mm Shank For drilling, chamfering in solid wood, wood composites, and plastic laminated materials

HSS GROUND JOBBER DRILLS - Imperial Our HSS Jobber Drills in imperial sizes are perfect for accurate drilling of hard and soft materials like solid...

HSS GROUND JOBBER DRILLS - Metric Our HSS Jobber Drills in metric sizes are perfect for accurate drilling of hard and soft materials like solid woo...

HSS Multi-Step Drills - Drill & Deburr in one process! Ideal for: Aluminium, Brass, Copper metals, sheet steel, plastic & stainless steel u...

HSS 2 Flute O Flute Straight Cutter for CNC Routers Combines an open flute design with single flute geometry to provide optimum chip removal. Desi...

HSS Single Flute O Flute Straight Cutter for CNC Routers HSS Single Flute O Flute Straight Cutter Combines an open flute design with single flute ...

HSS Drill & Tap To drill cored hole thread cutting and deburr in ONE operation Drill & Tap ferrous & non-ferrous metals & plastics ...

This HSS-grade 4-Flute Upcut Foam Cutter is ideal for CNC Routers, as it efficiently cuts thick foam and polystyrene with an upward chip flow. Its ...

Our HSS T Slotting Cutters feature a multi-tool design that enables them to be used on both copy routers and CNC machines.  Multi-Tool design for u...

These HSSE Single Flute Cutters are engineered for cutting aluminum, especially on copy routers. They contain 8% cobalt in the High Speed Steel, wh...

HSSE Cutter for Aluminium & UPVC - 2 Flute Special grind for easy drilling

Our Konig Hydro Clamping Chucks are the perfect choice if you seek both accuracy and versatility. These precision-balanced HSK-F interface toolhold...

Industrial Flush Arbors with Screw Designed to run tungsten-tipped slotting cutters and bearings, with the cutter sitting flush on the bottom of th...

Industrial Arbors with Nut Made to run the tungsten tipped slotting cutters and bearings Link to slotting Cutters - Tungsten Tipped Slotting Router...

Industrial Arbors with Screw Made to run the tungsten tipped slotting cutters and bearings with the ability to have the cutter sitting flush on the...

Engineered for reliability, these Industrial Ball Bearings provide higher speed performance than standard ones. Precision double steel-shielded con...

Industrial Bandsaw Blades for Dyco machines Premium German blading with guaranteed welds for wood cutting

Industrial Bandsaw Blades for Metal Cutting

Industrial Bandsaw Blades for Tanner machines Premium German blading with guaranteed welds for cutting wood, plastics and more

Industrial Dry Cut Sawblade for Metal & Steel Suitable for Mitre Saws and Circular Saws Max RPM 3000