Composites

Doesn’t it make you feel good when you recycle – and what could be easier than our Konig Green recycling initiative? Heaps of companies all over NZ...

Premium German made Jigsaw Blades 3140-1 Diamond grit. Ideal for highly abrasive materials and carbon fibre Cutting Depth: 50mm Overall...

Collet SLC For precision and reliability. For use as the internal collet of CNC slimline extension arbours.Precision Extension Arbors to fit Inter...

Power Clamping Nuts Increase your precision with Power Clamping Nuts. Our special coated surface has been proven to provide twice the accuracy comp...

Replaceable Knife Flush Trim Router Bit - 2 Knife 2 knife flush trim cutter for smooth accurate trimming. Useing replaceable knives ensures the d...

High Performance Industrial Thin Kerf Fine Cut Sawblades for Aluminium Flat - triple chip tooth with negative cutting angle. For cutting extrusion...

This Italian-made Precision Sawblade Mounting Arbor is designed to provide extreme precision and superior strength. Constructed from denser, corros...

KONIG Torque Wrenches for Collet nuts Tightening your tool holder incorrectly can have disastrous results! KONIG Torque Wrenches for Collet nuts he...

Stop wrestling to change tools and start doing it the fast and easy way with the Opti-Clamp Tool Changing System. Experience lightning-fast and saf...

Pull Studs Pull studs (also called retention knobs) are the link between the machine drawbar and the toolholder. These inset into the top of the to...

Industrial high-performance screws designed for use on tooling that has replaceable knives and bearings etc

High-Performance Industrial Flush Arbors with Screw Made to run the tungsten-tipped slotting cutters and bearings with the ability to have the cutt...

Collet Taper Wiper For cleaning the taper where the collet mounts into your toolholder, the mating taper to the spindle taper. This area gets part...

Experience superior accuracy and gripping power with Ultra Precision Collets ER40. These collets offer twice the accuracy of standard precision col...

Solid Tungsten Spiral Upcut Ballnose Cutter - 2 Flute for CNC Routers Designed for carving and modelling operations. Improved tip geometry gives a...

Replaceable Knife Chamfer Hand Held Router Bit - 2 Knife Bevel and Chamfer trim bits with two replaceable knives fixed by special Torx screws. The...

Replaceable Knife Inverted Flush Trim Router Bit - 2 Knife 2 knife flush trim cutter for smooth accurate cutting  These router bits can plunge Equ...

Premium quality German Tungsten Grit Jigsaw Blades 3121-1. Excellent for abrasive materials. Precise straight cuts in ceramics glass and medium har...

Simple! Just immerse the Cutters, Bearings, and Collets in the liquid for a few hours or overnight so Gleiten-Clean can soak into the dirt, resin, ...

Reduced Shank Drills - Metric • Titanium Nitride coating reduces heat and increase hardness • Premium M2 HSS quality • 135° split point cuts faster...

Industrial Arbors with Nut Made to run the tungsten tipped slotting cutters and bearings Link to slotting Cutters - Tungsten Tipped Slotting Router...

These brass collet cleaning brushes are specifically designed for cleaning router collets without scratching, abrading or damaging the collet. Pro...

Precision Extension Arbors with Internal Collet for CNC MachinesPrecision Extension Arbors with Internal Collet For extreme precision and reliabil...

Shank Diameter 1/4" Hex (10 Pack) Superior Head Design Greater Magnetism and Optimum Hardness. Alpha driver bits show less wear, have a longer ser...

(10 Pack) Shank Diameter 1/4" Hex Superior Head Design Greater Magnetism and Optimum Hardness. Alpha driver bits show less wear, have a longer ser...

Standard Double ended (10 Pack).

Slotted Driver Power Bit 25mm. • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged...

• 5/16" Heavy duty Impact driver bit. • Optimum full body hardness for longer service life and less wear • Compression forged tip, for an ideal fit...

Security PIN or Snake eye driver bits are available to in a range of sizes. (10 Pack)

Phillips Reduced Head (10 Pack)

5/16" Heavy duty Impact driver bit. (Pack of 10)

Double Ended Handipack (Pack of 10) • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression f...

Depth Stop Collar Stop collars with precision clamping nut for quick and easy assembly.

Drywall Number 2 - Alpha Phillips Drywall Bit 2 x 25mm (Pack of 10) • 1/4 Hex quick change shank • Optimum full body hardness for longer service li...

Phillips Style  Pack of 10. • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged ti...

Phillips Ribbed Insert Bit.

(Pack of 10) Made in USA. High quality driver bit

Made in USA. High quality driver bit 10 Pack Phillips Insert Bit 0 x 25mm 13-6831 Phillips Insert Bit 0 x 75mm 13-6834

10 Pack 32mm Total Length • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged tip,...

10 Piece Handy Pack 5mm Hex x 50mm total Length • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • C...

10 Pack 25mm Total Length • 1/4 Hex quick change shank • Optimum full body hardness for longer service life and less wear • Compression forged tip,...

Solid Tungsten V Flute Straight Cutter - 3 Flute for CNC Routers

Precision ground Spacer Shims. Always a useful item when stacking various items of tooling together on the spindle. By carefully selecting the spac...

Experience precise and reliable cuts with this CNC arbor for small diameter cutters. Great where small diameter cutters are needed for hard-to-reac...

Digital Vernier Height Gauge It is designed to make it super Safe, Fast, and Easy to measure the old cutter before removing it so that the new cutt...

New Bearing KitThe kit is supplied with 6 bearing sizes (9.5mm 12.7mm 16mm 19mm 22.2mm 25.4mm). This bearings allow the creation of multiple differ...

TC 2Fl Composite Compression Cutter 3/8"

KONIG Collet Spanner C Type ER32 C Style collet spanner. Used for tightening the nuts on collet toolholders for cnc's