Kitchen + Cabinetry & Shopfitting

 This Tungsten Tipped Router Bit features a 2 Flute design with a 1/4" (6.3mm) shank, making it a perfect choice for flush trimming cuts and smooth...

Tungsten Tipped Inverted Flush Trim Router Bits are perfect for copy work and features 2 flutes and a 1/4" shank. This handy bit is designed to wor...

This 2 Flute Tungsten Tipped Roundover Router Bit is designed to provide a smooth radius finish on any workpiece. With a 1/4" Shank to fit trim rou...

Replaceable Tungsten Knives with Two Sides Our Replaceable Tungsten Knives are made from superior-quality tungsten that is designed to keep a sharp...

Tungsten Tipped Straight Router Bit - 2 Flute - 1/4" Shank For Routing, Grooving, rebating Longer life in routing abrasive materials. The workhors...

Tungsten Tipped "V" Groove Hand Held Router Bit - 2 Flute - 1/2" Shank For V grooving bevelling and lettering. These double cutting edge bits off...

Solid Tungsten Straight Router Bit - Single Flute - 1/4" Shank Solid Tungsten Straight Router Bit - Single Flute - 1/4" Shank For all general purp...

Tungsten Tipped Roundover Hand Held Router Bit - 2 Flute - 1/2" Shank Rounding over cutter. Gives extra smooth chatter free cuts due to precise to...

Tungsten Tipped Flush Trim Router Bit - 2 Flute - 1/2" Shank For fast smooth and accurate trimming cuts for laminates and template work.

Tungsten Tipped ACM Folding Router Bit - 2 Flute ACM panels are an aluminium composite material that can be shaped using a very simple processing m...

Tungsten Tipped Inverted Flush Trim Router Bit - 2 Flute - 1/2" Shank Tungsten Tipped Inverted Flush Trim Router Bits are perfect for copy work and...

Tungsten Tipped Die Mould Patternmakers Router Bit - 2 Flute - 1/2" Shank Various angle cutters to easily produce taper draw on dies and moulds

Tungsten Tipped Chamfering Router Bit - 2 Flute - 1/2" Shank For creating clean accurate bevels. Chamfer bits can cut clean, accurate bevels and ...

Solid Tungsten Straight Router Bit - 2 Flute - 1/4" Shank Straight Router Bit - 2 Flute - 1/4" Shank Solid Tungsten. For all general purpose routi...

Tungsten Tipped Router Bit to create bevels and chamfers - 2 Flute - 1/4" Shank Chamfer bits can cut clean, accurate bevels and chamfers and are gr...

Tungsten Tipped Fine Point Beading Router Bit   For beading the surface of material to a fine point• Use with template or guide for face forming• U...

Tungsten Tipped Round Nose Router Bit - 2 Flute - 1/2" Shank For creating rounded grooves. Personalize your doors, drawer fronts, panels or any s...

Tungsten Tipped "V" Groove Hand Held Router Bit - 2 Flute - 1/4" Shank For V grooving bevelling and lettering . These double cutting edge bits of...

Draft Strip Router Bit These cutters are perfect for fitting Aquamae Raven,and Schleger weather seal and smoke seals using a portable router. A sma...

Tungsten Tipped Laminate Trimmer This 22º bevel bit is for small hand held trimmers fitted with a roller guide. A flat is on the shank for the clam...

Tungsten Tipped Rebating Hand Held Router Bit - 2 Flute - 1/2" Shank For creating fast and accurate rebates. Has ball bearing guide for mar-free f...

Tungsten Tipped "V" Veining Router Bit - Single Flute - 1/4" Shank For 45° decorative grooving and scoring. Can be used in multiple materials

Tungsten Tipped Combination Laminate Trimmer Router Bit - 2 Flute - 1/4" Shank Combination of bevel and flush trim cut. Work to your highest stan...

Tungsten Tipped Cove Router Bits - 2 Flute - 1/2" Shank Up, sheer cutting angle clears chip fast for chatter free accurate routing Make simple or e...