Skip to content
Get accurate before & after purchase advice from the industry experts!
Get accurate before & after purchase advice from the industry experts!
Technical Hub Open Trade Credit Account
Plastics

Plastics

Filters

  • Replaceable Knife Engraving System - tungstenandtool
    $242.55 - $242.55
    $211.68
    $242.55 - $242.55
    $211.68

    Replaceable Knife Engraving System

    Replaceable Knife Engraving System - 12.7mm shank

    $242.55 - $242.55
    $211.68
    $242.55 - $242.55
    $211.68
  • Precision Collets EOC08 - tungstenandtool
    $104.74 - $104.74
    $104.74
    $104.74 - $104.74
    $104.74

    Precision Collets EOC08

    Precision Collets EOC08These EOC (DIN 6388) collets conform to DIN 6388 standards. Snap collet into the nut before screwing the nut onto the spindl...

    View full details
    $104.74 - $104.74
    $104.74
    $104.74 - $104.74
    $104.74
  • Industrial Holesaw Set - tungstenandtool
    $577.43 - $577.43
    $260.10
    $577.43 - $577.43
    $260.10

    Industrial Holesaw Set

    Industrial Holesaw Set

    $577.43 - $577.43
    $260.10
    $577.43 - $577.43
    $260.10
  • Use the KONIG torque wrenches to avoid overtightening or undertightening and to give the confidence they they are correctly done everytime. Overtightening is the most common issue which leads to knife breakage torx screw head stripping and damage to the knife bed.
    $302.64 - $302.64
    $302.64
    $302.64 - $302.64
    $302.64

    Torque Wrenches for 'Torx' screws

    Torque Wrenches for 'Torx' screws Tightening torx screws incorrectly can damage your cutter and your replaceable knives. Use the KONIG torque wrenc...

    View full details
    $302.64 - $302.64
    $302.64
    $302.64 - $302.64
    $302.64
  • Replaceable Knife V Cutter - tungstenandtool
    $530.92 - $530.92
    $530.92
    $530.92 - $530.92
    $530.92

    Replaceable Knife V Cutter

    Replaceable Knife V Cutter 91 degrees

    $530.92 - $530.92
    $530.92
    $530.92 - $530.92
    $530.92
  • $970.12 - $970.12
    $931.99
    $970.12 - $970.12
    $931.99

    SuperGrip Toolholder - ISO & HSK Taper

    SuperGrip Toolholder Still a collet toolholder the Supergrip toolholders grip the collet in a different way to standard collet toolholders. When th...

    View full details
    $970.12 - $970.12
    $931.99
    $970.12 - $970.12
    $931.99
  • Collet Sleeves (without flat) - tungstenandtool
    $28.07 - $28.07
    $26.37
    $28.07 - $28.07
    $26.37

    Collet Sleeves (without flat)

    Collet Sleeves (without flat) Used aa a collet adapter in routers for gripping smaller size shanks.

    $28.07 - $28.07
    $26.37
    $28.07 - $28.07
    $26.37
  • Stainless Steel Toolholder - ISO & HSK Tapers - tungstenandtool
    $460.98 - $460.98
    $460.98
    $460.98 - $460.98
    $460.98

    Stainless Steel Toolholder - ISO & HSK Tapers

    Stainless Steel Toolholder Stainless Steel Toolholder Special tool holders produced in stainless steel AISI 420. Needed when working with coolant:...

    View full details
    $460.98 - $460.98
    $460.98
    $460.98 - $460.98
    $460.98
  • Bore Reducers - tungstenandtool
    $96.68 - $96.68
    $82.41
    $96.68 - $96.68
    $82.41

    Bore Reducers

    Bore Reducers for Moulder Heads Made to to insert in the top and bottom of moulder heads to reduce the bore of the moulder head

    $96.68 - $96.68
    $82.41
    $96.68 - $96.68
    $82.41
  • Torx Keys - tungstenandtool
    $53.72 - $53.72
    $27.38
    $53.72 - $53.72
    $27.38

    Torx Keys

    Torx Keys Flag keys made for tightening torx head screws especially in replaceable knife router cutters

    $53.72 - $53.72
    $27.38
    $53.72 - $53.72
    $27.38
  • Collet Sleeves - tungstenandtool
    $30.75 - $30.75
    $30.75
    $30.75 - $30.75
    $30.75

    Collet Sleeves

    Collet Sleeves Also known as twist drill adaptors these are the sleeves used to take smaller size drills in CNC collets.

    $30.75 - $30.75
    $30.75
    $30.75 - $30.75
    $30.75
  • Collet SLC - tungstenandtool
    $152.32 - $152.32
    $136.31
    $152.32 - $152.32
    $136.31

    Collet SLC

    Collet SLC For precision and reliability. For use as the internal collet of CNC slimline extension arbours.

    $152.32 - $152.32
    $136.31
    $152.32 - $152.32
    $136.31
  • $20.54 - $20.54
    $20.54
    $20.54 - $20.54
    $20.54

    Bearing Retainers

    Bearing Retainers Used to hold the shank bearings onto the router bit shanks to prevent them from moving up the shank while in use

    $20.54 - $20.54
    $20.54
    $20.54 - $20.54
    $20.54
  • Industrial Arbors with Screw - tungstenandtool
    $21.32 - $21.32
    $20.54
    $21.32 - $21.32
    $20.54

    Industrial Arbors with Screw

    Industrial Arbors with Screw Made to run the tungsten tipped slotting cutters and bearings with the ability to have the cutter sitting flush on the...

    View full details
    $21.32 - $21.32
    $20.54
    $21.32 - $21.32
    $20.54
  • Smooth Industrial Ball Bearings - tungstenandtool
    $54.04 - $54.04
    $52.31
    $54.04 - $54.04
    $52.31

    Smooth Industrial Ball Bearings

    Smooth Industrial Ball Bearings Using the same quality standards as our regular steel bearings these bearing assemblies feature satin-smooth sleeve...

    View full details
    $54.04 - $54.04
    $52.31
    $54.04 - $54.04
    $52.31
  • Replaceable Tungsten Knives for Engraving System - tungstenandtool
    $1,925.92 - $1,925.92
    $1,848.63
    $1,925.92 - $1,925.92
    $1,848.63

    Replaceable Tungsten Knives for Engraving System

    Replaceable Tungsten Knives for Engraving System Replaceable Tungsten Knives for Engraving System

    $1,925.92 - $1,925.92
    $1,848.63
    $1,925.92 - $1,925.92
    $1,848.63
  • Improves machining and extends tool life by eliminating contaminants. Made with plastic and soft fibre pads for safe contact inside spindles.
    $71.20 - $71.20
    $71.20
    $71.20 - $71.20
    $71.20

    Spindle Taper Wipers

    There is nothing like Spindle Taper Wipers for cleaning the internal taper perfectly where the toolholder interfaces the spindle of your CNC. Regul...

    View full details
    $71.20 - $71.20
    $71.20
    $71.20 - $71.20
    $71.20
  • Precision Collets EOC12 - tungstenandtool
    $132.03 - $132.03
    $132.03
    $132.03 - $132.03
    $132.03

    Precision Collets EOC12

    Precision Collets EOC12 Precision Collets EOC12 For precision and reliability.

    $132.03 - $132.03
    $132.03
    $132.03 - $132.03
    $132.03
  • Precision Mounting Arbor - tungstenandtool
    $491.73 - $491.73
    $446.23
    $491.73 - $491.73
    $446.23

    Precision Mounting Arbor

    Precision Mounting Arbor for CNC Machines Precision Mounting Arbor. For extreme precision and reliability. Made from extremely high strength corro...

    View full details
    $491.73 - $491.73
    $446.23
    $491.73 - $491.73
    $446.23
  • Arbors to fit Trim Blades - tungstenandtool
    $357.36 - $357.36
    $339.81
    $357.36 - $357.36
    $339.81

    Arbors to fit Trim Blades

    CNC Arbors to fit Trim Blades Designed to hold the carbide tipped saws used for Plastics trimming.

    $357.36 - $357.36
    $339.81
    $357.36 - $357.36
    $339.81
  • $13.48 - $13.48
    $13.38
    $13.48 - $13.48
    $13.38

    Depth Stop Collar

    Depth Stop Collar Stop collars with precision clamping nut for quick and easy assembly.

    $13.48 - $13.48
    $13.38
    $13.48 - $13.48
    $13.38
  • Replaceable Knife Adjustable Beveller Cutter - tungstenandtool
    $1,752.33 - $1,752.33
    $1,752.33
    $1,752.33 - $1,752.33
    $1,752.33

    Replaceable Knife Adjustable Beveller Cutter

    Replaceable Knife Adjustable Beveller Cutter for CNC routers. Replaceable Knife Adjustable Beveller Cutter. For jointing bevelling rebating and ch...

    View full details
    $1,752.33 - $1,752.33
    $1,752.33
    $1,752.33 - $1,752.33
    $1,752.33
  • $259.82 - $259.82
    $259.82
    $259.82 - $259.82
    $259.82

    Magnetic Setter Set for Planer Knives

    The Magnetic Setter Set for Planer Knives offers superior precision in aligning knives for planer/thicknesser heads. Seamless micro adjustments wil...

    View full details
    $259.82 - $259.82
    $259.82
    $259.82 - $259.82
    $259.82
  • A rubber cleaning stick. Apply to sanding belts after use and it helps clean the belt, allowing for longer belt life. Available at Tungsten & Tool NZ.
    $70.01 - $70.01
    $70.01
    $70.01 - $70.01
    $70.01

    Abrasive Belt / Disc Cleaner Restorer Stick

    Keep your sanding belts and discs clean and efficient with the Abrasive Belt / Disc Cleaner Restorer Stick. This stick is made of solid natural rub...

    View full details
    $70.01 - $70.01
    $70.01
    $70.01 - $70.01
    $70.01
}